EMBOSS: plotcon manual

plotcon

Function

Plot quality of conservation of a sequence alignment

Description

Displays a graphical representation of the similarity along a set of aligned sequences.

The similarity is calculated by moving a window of a specified length along the aligned sequences. Within the window, the similarity of any one position is taken to be the average of all the possible pairwise scores of the bases or residues at that position. The pairwise scores are taken from the specified similarity matrix. The average of the position similarities within the window is plotted.

The program is useful for determining where the quality of alignments is good or bad.

The average similarity is calculated by:

Av. Sim. =       sum( Mij*wi + Mji*wj  )
                      -------------------
                  (Nseq*Wsize)*((Nseq-1)*Wsize)

sum - over column*window size
w - sequence weighting
M - matrix comparison table
i,j - with respect to residue i or j
Nseq - number of sequences in the alignment
Wsize - window size

This program is useful for gaining a qualitative insight into where there are regions of conservation in a group of aligned sequences.

Note that you should only compare the results of two runs of plotcon if you use the same window size in each. This is because the 'similarity score' units that are output are very sensitive to the size of the window. A large window (e.g. 100) gives a nice, smooth curve, and very low 'similarity score' units, whereas a small window (e.g. 4) gives a very spikey, noisy plot with 'similarity score' units of a round 1.00

Usage

Here is a sample session with plotcon


% plotcon -sformat msf globins.msf -graph cps 
Plot quality of conservation of a sequence alignment
Window size [4]: 

Created plotcon.ps

Go to the input files for this example
Go to the output files for this example

Command line arguments

   Standard (Mandatory) qualifiers:
  [-sequences]         seqset     File containing a sequence alignment
   -winsize            integer    Number of columns to average alignment
                                  quality over. The larger this value is, the
                                  smoother the plot will be.
   -graph              xygraph    Graph type

   Additional (Optional) qualifiers:
   -scorefile          matrix     This is the scoring matrix file used when
                                  comparing sequences. By default it is the
                                  file 'EBLOSUM62' (for proteins) or the file
                                  'EDNAFULL' (for nucleic sequences). These
                                  files are found in the 'data' directory of
                                  the EMBOSS installation.

   Advanced (Unprompted) qualifiers: (none)
   Associated qualifiers:

   "-sequences" associated qualifiers
   -sbegin1             integer    Start of each sequence to be used
   -send1               integer    End of each sequence to be used
   -sreverse1           boolean    Reverse (if DNA)
   -sask1               boolean    Ask for begin/end/reverse
   -snucleotide1        boolean    Sequence is nucleotide
   -sprotein1           boolean    Sequence is protein
   -slower1             boolean    Make lower case
   -supper1             boolean    Make upper case
   -sformat1            string     Input sequence format
   -sdbname1            string     Database name
   -sid1                string     Entryname
   -ufo1                string     UFO features
   -fformat1            string     Features format
   -fopenfile1          string     Features file name

   "-graph" associated qualifiers
   -gprompt             boolean    Graph prompting
   -gtitle              string     Graph title
   -gsubtitle           string     Graph subtitle
   -gxtitle             string     Graph x axis title
   -gytitle             string     Graph y axis title
   -goutfile            string     Output file for non interactive displays
   -gdirectory          string     Output directory

   General qualifiers:
   -auto                boolean    Turn off prompts
   -stdout              boolean    Write standard output
   -filter              boolean    Read standard input, write standard output
   -options             boolean    Prompt for standard and additional values
   -debug               boolean    Write debug output to program.dbg
   -verbose             boolean    Report some/full command line options
   -help                boolean    Report command line options. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning             boolean    Report warnings
   -error               boolean    Report errors
   -fatal               boolean    Report fatal errors
   -die                 boolean    Report deaths

Standard (Mandatory) qualifiers		Allowed values	Default
[-sequences] (Parameter 1)	File containing a sequence alignment	Readable set of sequences	Required
-winsize	Number of columns to average alignment quality over. The larger this value is, the smoother the plot will be.	Any integer value	4
-graph	Graph type	EMBOSS has a list of known devices, including postscript, ps, hpgl, hp7470, hp7580, meta, colourps, cps, xwindows, x11, tektronics, tekt, tek4107t, tek, none, null, text, data, xterm, png, xml	EMBOSS_GRAPHICS value, or x11
Additional (Optional) qualifiers		Allowed values	Default
-scorefile	This is the scoring matrix file used when comparing sequences. By default it is the file 'EBLOSUM62' (for proteins) or the file 'EDNAFULL' (for nucleic sequences). These files are found in the 'data' directory of the EMBOSS installation.	Comparison matrix file in EMBOSS data path	EBLOSUM62 for protein EDNAFULL for DNA
Advanced (Unprompted) qualifiers		Allowed values	Default
(none)

Input file format

plotcon reads a set of gapped, aligned sequences.

Input files for usage example

File: globins.msf

!!AA_MULTIPLE_ALIGNMENT 1.0

  ../data/globins.msf MSF:  164 Type: P 25/06/01 CompCheck: 4278 ..

  Name: HBB_HUMAN Len: 164  Check: 6914 Weight: 0.14
  Name: HBB_HORSE Len: 164  Check: 6007 Weight: 0.15
  Name: HBA_HUMAN Len: 164  Check: 3921 Weight: 0.15
  Name: HBA_HORSE Len: 164  Check: 4770 Weight: 0.19
  Name: MYG_PHYCA Len: 164  Check: 7930 Weight: 0.23
  Name: GLB5_PETMA Len: 164  Check: 1857 Weight: 0.21
  Name: LGB2_LUPLU Len: 164  Check: 2879 Weight: 0.10

//

           1                                               50
HBB_HUMAN  ~~~~~~~~VHLTPEEKSAVTALWGKVN.VDEVGGEALGR.LLVVYPWTQR
HBB_HORSE  ~~~~~~~~VQLSGEEKAAVLALWDKVN.EEEVGGEALGR.LLVVYPWTQR
HBA_HUMAN  ~~~~~~~~~~~~~~VLSPADKTNVKAA.WGKVGAHAGEYGAEALERMFLS
HBA_HORSE  ~~~~~~~~~~~~~~VLSAADKTNVKAA.WSKVGGHAGEYGAEALERMFLG
MYG_PHYCA  ~~~~~~~VLSEGEWQLVLHVWAKVEAD.VAGHGQDILIR.LFKSHPETLE
GLB5_PETMA PIVDTGSVAPLSAAEKTKIRSAWAPVYSTYETSGVDILVKFFTSTPAAQE
LGB2_LUPLU ~~~~~~~~GALTESQAALVKSSWEEFNANIPKHTHRFFILVLEIAPAAKD

           51                                             100
HBB_HUMAN  FFESFGDLSTPDAVMGNPKVKAHGKKVLGAFSDGLAHLDNLKGTFATLSE
HBB_HORSE  FFDSFGDLSNPGAVMGNPKVKAHGKKVLHSFGEGVHHLDNLKGTFAALSE
HBA_HUMAN  FPTTKTYFPHFDLSHGSAQVKGHGKKVADALTNAVAHVDDMPNALSALSD
HBA_HORSE  FPTTKTYFPHFDLSHGSAQVKAHGKKVGDALTLAVGHLDDLPGALSNLSD
MYG_PHYCA  KFDRFKHLKTEAEMKASEDLKKHGVTVLTALGAILKKKGHHEAELKPLAQ
GLB5_PETMA FFPKFKGLTTADQLKKSADVRWHAERIINAVNDAVASMDDTEKMSMKLRD
LGB2_LUPLU LFSFLKGTSEVPQNNPELQAHAGKVFKLVYEAAIQLQVTGVVVTDATLKN

           101                                            150
HBB_HUMAN  LHCDKLH..VDPENFRLLGNVLVCVLAHHFGKEFTPPVQAAYQKVVAGVA
HBB_HORSE  LHCDKLH..VDPENFRLLGNVLVVVLARHFGKDFTPELQASYQKVVAGVA
HBA_HUMAN  LHAHKLR..VDPVNFKLLSHCLLVTLAAHLPAEFTPAVHASLDKFLASVS
HBA_HORSE  LHAHKLR..VDPVNFKLLSHCLLSTLAVHLPNDFTPAVHASLDKFLSSVS
MYG_PHYCA  SHATKHK..IPIKYLEFISEAIIHVLHSRHPGDFGADAQGAMNKALELFR
GLB5_PETMA LSGKHAK..SFQVDPQYFKVLAAVIADTVAAGDAGFEKLMSMICILLRSA
LGB2_LUPLU LGSVHVSKGVADAHFPVVKEAILKTIKEVVGAKWSEELNSAWTIAYDELA

           151        164
HBB_HUMAN  NALAHKYH~~~~~~
HBB_HORSE  NALAHKYH~~~~~~
HBA_HUMAN  TVLTSKYR~~~~~~
HBA_HORSE  TVLTSKYR~~~~~~
MYG_PHYCA  KDIAAKYKELGYQG
GLB5_PETMA Y~~~~~~~~~~~~~
LGB2_LUPLU IVIKKEMNDAA~~~

Output file format

A graph of the quality of the alignment is dispalyed on the specifed graphics device.

Output files for usage example

Graphics File: plotcon.ps

[plotcon results]

Data files

It reads in the specified similarity matrix.

EMBOSS data files are distributed with the application and stored in the standard EMBOSS data directory, which is defined by the EMBOSS environment variable EMBOSS_DATA.

To see the available EMBOSS data files, run:

% embossdata -showall

To fetch one of the data files (for example 'Exxx.dat') into your current directory for you to inspect or modify, run:


% embossdata -fetch -file Exxx.dat

Users can provide their own data files in their own directories. Project specific files can be put in the current directory, or for tidier directory listings in a subdirectory called ".embossdata". Files for all EMBOSS runs can be put in the user's home directory, or again in a subdirectory called ".embossdata".

The directories are searched in the following order:

. (your current directory)
.embossdata (under your current directory)
~/ (your home directory)
~/.embossdata

Notes

None.

References

None.

Warnings

If you give it a set of unaligned sequences, it will plot the (poor!) quality of these as if they were aligned.

Diagnostic Error Messages

None.

Exit status

It always exits with status 0.

Known bugs

None.

Program name	Description
emma	Multiple alignment program - interface to ClustalW program
infoalign	Information on a multiple sequence alignment
prettyplot	Displays aligned sequences, with colouring and boxing
showalign	Displays a multiple sequence alignment
tranalign	Align nucleic coding regions given the aligned proteins

Author(s)

Tim Carver (tcarver © rfcgr.mrc.ac.uk)
MRC Rosalind Franklin Centre for Genomics Research Wellcome Trust Genome Campus, Hinxton, Cambridge, CB10 1SB, UK

History

Written (Sept 2000) - Tim Carver.

Target users

This program is intended to be used by everyone and everything, from naive users to embedded scripts.

Comments

None

Function

Description

Usage

Command line arguments

Input file format

Input files for usage example

File: globins.msf

Output file format

Output files for usage example

Graphics File: plotcon.ps

Data files

Notes

References

Warnings

Diagnostic Error Messages

Exit status

Known bugs

See also

Author(s)

History

Target users

Comments